worldinoutRegisterLogin | Set Homepage | Save desktop | Mobile | Qr code
Member
Guangzhou Zhenroumei Chemical Coatings Limited
BOYET Series;MARSIDE Series;GOODSIF Series
 
Your current location:Home » Sell » BM1K Pearl Colors

BM1K Pearl Colors

Click image to view full size image
Title: BM1K Pearl Colors 
Brand: -
Model: -
Unit price: Negotiable
MOQ: -0 -
Quantity: Negotiable
Delivery date: Since the payment date Days delivery

Contact: Qiqin Huang (Ms.)    
Mobile:
Telephone:

  Inquiry
Details

BOYET Series

Product Name/Model:BM1K Pearl Colors

 

Characteristic:BM1K Pearl Colors with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.

Substrates

Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or2k primer

Surface Cleaning

Wash by warm soap, remove wax, silicon and other contaminations with
degreaser, sanding with P800-P1000, wash with clean water then keep dry;
again with degreaser.

Mixing Ratio

BM1K Pearl Colors

Thinner

1

1

<15℃

BM1K Pearl Colors

BYTX-1 Fast Thinner

15-30℃  

BM1K Pearl Colors

BYTX-2 Standard Thinner

>30℃ 

BM1K Pearl Colors

BYTX-3 Slow Thinner

Spray Viscosity

14-16s to drop off, in 4# viscosity cup at 25°C,

ReTreatment

After spray, allow 10-20 minutes air-drying time,then spray clear coat at once.

Spray Gun Set Up

Gravity Feed: 1.2-1.5mm 3-5kg/cm 2
Suction Feed: 1.4-1.6mm 3-5kg/cm 2

Spray Technology

Coats&Thickness: 2-3 coats, total 15-20um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.

Shelf Life

2 years in original sealed can, cool and dry place at 25℃.

Package 

1L×12 or 3.75L×4

Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.


BM1K Pearl Colors
Inquiry
Sell
  • No Category
New Login
Company QR code
Anytime Anywhere Mobile